MINIMAL 7

Seamless Built-in Cooker Hood

MINIMAL 7 is a cooker hood designed for cabinet installation. The cooker hood is designed to be installed directly into the cabinetry, blending seamlessly into the upper kitchen cabinets.

Powerful LED lights illuminate perfectly the entire surface below. The luminaires come standard with a three-stage dimming function and color temperature control, which allows you to adjust the lighting to suit the mood and other lighting around the cooker hood. The range hood has a dirt repellent-coating that repels possible stains caused by fingerprints. The motor is quiet and energy efficient, achieving energy class A++.

Operating functions

The Minimal 7 cooker hood operates with hand gestures. You don't need to touch the appliance at all; simply moving your hand is enough to turn the cooker hood on and off, change its operating mode, and adjust the lighting. This way, you avoid leaving smudges on the cooker hood's surface from your hands while cooking. If you prefer, you can also use the remote control that comes with the cooker hood.

Control by hand gesture:
- By stopping your hand in front of the kitchen hood for about 2 seconds , you turn on the lighting, and by repeating the same thing, you can turn off the lighting.
- By swiping your hand from left to right, the speed mode changes to higher.
- By swiping your hand from right to left, you can decrease the speed mode.

Installation

- MINIMAL 7 is cabinet-mounted kitchen hood.
- The hood is usually installed as its own design element, separate from the other cabinets etc. on the wall.
- If the fan is not connected to a duct, you can purchase a LongLife filter as an accessory, through which the cleaned air flows back into the room.
- When blowing air upwards and using an activated carbon filter, there should be about 20 cm of free space above the fans so that the cleaned air can freely return to the room space.
- Installing the cooker hood is easy and quick to do with clear instructions and installation pictures.